Nema 17 Stepper Motor
The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA17 4.8 kg-cm Stepper Motor can provide 4.8 kg-cm of torque at 2.5A current per phase.
The motors position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The NEMA17 4.8 kg-cm Stepper Motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.
They are very useful in the various application, especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.
It is a brushless DC motor, so the life of this motor is dependent upon life ofthe bearings. The position control is achieved by a simple Open Loop control mechanism so doesn't require complex electronic control circuitry.
It comes with a detachable 72cm cable which makes wiring and rewiring very fast and easy work. The design of this cable is such that it can directly be mounted on a stepper motor controller.So, playing with the connection is done with just snap of fingers.
Choose Quantity
| Motor Type | Single Shaft |
| Step Angle | 1.8 degree |
| Holding Torque (Kg-Cm) | 4.8 |
| Operating Voltage (VDC) | 3.1 |
| Supply Current (A) | 2.5 A/Phase |
| No. of Leads | 4 |
| Inductance (mH/Phase) | 1.8 |
| Resistance | 1.25 ohms |
| Rotor Inertia (gm-cm2) | 68 |
| Weight (gm) | 366 |
| Dimensions (mm) LxWxH | 42x42x48 |
| Detent Torque (kg-cm) | 0.28 |
| Frame Size (mm) | 42 x 42 |
| Inductance Accuracy | ±20% |
| Resistance Accuracy | ±10% |
| Shaft Type | D-type |
| Shaft Diameter (mm) | 5-(Round-side); 4.7-(D-side) |
| Shaft Length (mm) | 22 |
| Step Angle Accuracy | ±5% |
| Cable Length (cm) | 72 |
